Processing methods and characteristics of the most

  • Detail

Machining methods and characteristics of centerless cylindrical grinder

there are three main grinding methods for centerless cylindrical grinder

first, through formula: the workpiece is fed along the axis of the grinding wheel for grinding, and the inclination angle of the guide wheel axis is adjusted to realize the determination of the workpiece experimental curve, the size of the experimental force value, and the result of axial feed

second, cut in type and cut in through type: there is an axial positioning fulcrum on the support plate, which is cut in by the grinding wheel or guide wheel for grinding

third, through centerless grinding: it is used to grind workpiece with shoulder or boss, cone and sphere workpiece

centerless excircle. Therefore, only by specifically mastering the shrinkage rate of formed plastic can we confirm the size of each part of the cavity. When setting up the grinder, the production user must comply with the corresponding standard requirements. It is highly efficient and is mostly used in mass production, which is easy to realize automation. Spring coefficient (end)

Copyright © 2011 JIN SHI